Chemical Bamboo Preservation
Chemical preservation (with or without the help of special equipment) ensures long term protection. Depending upon the method of bamboo treatment, chemical preservatives can impart short term or long term protection.
With a few exceptions, chemical preservatives to protect bamboo against biological attacks and degradation are toxic. Selection and application has to be done with great care to meet performance, environment requirements and safety.
Depending upon the carrier solvents, bamboo preservatives are divided into 2 different categories: Non-fixing and fixing type preservatives. Non-fixing preservatives will leach out the bamboo when exposed to rain. In other words non-fixing type preservatives are NOT suited for outdoor use.
Bamboo Preservation Tank
Photo by: Stéphane Schröder © www.guaduabamboo.com
Non-Fixing Type Preservatives
Non-fixing bamboo preservatives mainly consist of boron salts, which are effective against borers, termites and fungi (except soft rot fungi). These boron salts are dissolved in water. After treatment, the water evaporates leaving the salts inside the bamboo. They are not toxic and can be used for treating bamboo products like baskets, dry containers, etc. which come in contact with food products.
Boric Acid Borax
Curing bamboo with borax and boric acid is the most popular bamboo preservation method (for indoor use) around the world because it is effective and more environmentally friendly than other wood preservatives.
The combination of boric acid and borax in a ratio of 1:1.5 is an alkaline salt called: Disodium octaborate tetrahydrate (Na2B8O13 x 4H2O) and is available in pre-mixed powder form, usually under the commercial names: Tim-Bor or SoluBor, among others.
Disodium octaborate tetrahydrate is a white, odorless, powdered substance that is not flammable, cumbustible, or explosive and has acute low oral and dermal toxicity. The product itself is fire retardant and shows no hazardous decomposition.
This salt, is used as an insecticide and fungicide, and is also effective against fungi and algae. It has an infinite shelf life and is not affected by temperature. Diluted with water, bamboo can be impregnated, submerged or sprayed with this chemical.
Formula (1):
boric acid / borax
ratio 1:1.5
Formula (2):
boric acid / borax / sodium dichromate
ratio 2:2:0.5
Recommended concentration:
4-5% indoor use (not exposed to weather or ground contact)
* How to Interpret the Terms: 'Ratio' and 'Concentration'?
The ratio of the chemical solution is based on kilograms per 100 liters of water.
For example, if you see this:
boric acid / borax / sodium dichromate
ratio 2:2:0.5
It actually means this:
a mixture of 2 kg of boric acid / 2 kg of borax / 500 gr of sodium dichromate in 100 liters of water.
The above example is the equivalent of 4,5% concentration. If you want to ramp this up to a concentration of 9% you just have to double the mixture like this:
a mixture of 4 kg of boric acid / 4 kg of borax / 1 kg of sodium dichromate in 100 liters of water.
Fixing Type Preservatives
These chemical bamboo preservation formulations are proportionate mixtures of different salts which interact with each other in the presence of bamboo and become chemically fixed. In principle, the degree of fixation and efficacy depends upon the nature of the components and their combination and concentration.
For example, Chromium is responsible for fixation, copper is effective against decay fungi and soft rot and the third compound acts against insect and fungus. The process of fixation requires some weeks during which the material should be stored under cover. Slow fixation is preferred in case of bamboo as it allows diffusion and better distribution of preserving salts.
Copper Chrome Arsenic (CCA)
CCA is a heavy duty broad spectrum chemical bamboo preservative patented as AsCu. It has been found to provide protection for 50 years or more. Outdoor use is recommended only due to the arsenic component, which can also causes a green coloration on the bamboo.
Formula:
arsenic pentoxide / copper sulphate / sodium dichromate
ratio 1:3:4
Recommended concentration:
6% outdoor use (structures exposed to weather but not in contact with ground)
10% outdoor use (structures exposed to weather and in ground contact)
Copper Chrome Boron (CCB)
CCB is a broad spectrum chemical bamboo preservative and a good alternative to CCA, but less effective with a lower degree of fixation, because of the boron component.
Formula:
boric acid / copper sulphate / sodium dichromate
ratio 1.5:3:4
Recommended concentration:
6-8% indoor use (not exposed to weather or ground contact)
8-10% outdoor use (structures exposed to weather and in ground contact)
Zinc Chrome
Zinc Chloride is highly hygroscopic and treated bamboo will give a wet look in rainy season. This can adversely help paints and other finishes.
Formula:
Zinc chloride / sodium dichromate
ratio 1:1
Recommended concentration:
10% outdoor use (structures exposed to weather and in ground contact)
Copper Chrome Acetic
Formula:
copper sulphate / sodium dichromate / acetic acid
ratio 5.6:5.6:0.25
Recommended concentration:
8% outdoor use (structures exposed to weather and in ground contact)
Fire Retardant Preservative
This treatment is intended to protect materials against fire as well as decay and insect attack.
Formula:
boric acid / copper sulphate / zinc chloride / sodium dichromate
ratio 3:1:5:6
Recommended concentration:
25% indoor and outdoor use
Creosote
It is a broad spectrum bamboo preservative and is a cost effective chemical for treatment for exterior applications. It has been used for treating railway sleepers and wooden poles.
Coal tar and creosote available from coal is a dark brown viscous liquid. Creosote should be used exclusively for pressure processes or hot and cold treatment. Being oily, it imparts water repellence to the treated material. It is effective against fungal and insect attack. Due to its dark brown color and bad odor, its use is restricted to exterior applications, especially in contact with mud/ ground.
Light Organic Solvent-based Preservatives (LOSP)
These are slightly more expensive bamboo preservatives where the organic solvent acts as a carrier for toxic molecules and later evaporates, leaving the active ingredients behind. They are available commercially in ready-to-use forms. A good formulation is an appropriate mixture of fungicides and insecticides. There is little change of color of the treated material but a residual odor may remain for some time. The method of use will be recommended by the manufacturer. Formulations available in concentrates are more economical to use.
Trichlorophenol (TCP)
It is a more eco friendly substitute for Pentachlorophenol. Ready to use (5%) solution of this fungicide along with insecticides for broad spectrum performance are commercially available. Concentrates which can be diluted with mineral turpentine oil are more economical for industrial use.
Copper/Zinc soaps
They have emerged as alternatives to other organic preservatives which cause environmental hazards. Napthenates of copper and zinc are most common (metallic soaps). They are available as ready-to-use formulations containing appropriate amounts of insecticides. They are slightly more expensive than TCP formulations. However, they are more eco-friendly and also have no pungent smell.
What is the drying method being adopted in Colombia with tubes running into bamboo?